Skip to main content

Optimize Several Routes Together

Share one area's stops between two or more vans so every driver gets an efficient route, and adjust the plan when a driver is off.

M
Written by Matt Panton

If two or more of your routes cover the same area on the same days, SMRT can plan them as a group. It takes every stop from all of those routes and shares them out between the vans, so each driver gets a short, tidy route and no two vans cross over each other.

Example: You run two vans, "North 1" and "North 2", every Monday and Thursday. Their areas overlap in the middle of town. You turn on Optimize with other routes on North 1 and pick North 2. Now every Monday and Thursday, SMRT takes all the stops from both routes and splits them into two efficient routes, one for each van.

How it works

  • One route is the main route. It does the planning for the whole group.

  • The other routes are partner routes. SMRT fills them with stops when it plans the main route.

  • Each route is one van. If you have three vans, you need three routes: one main route and two partner routes.

Before you start

  • All the routes must be Master routes, not subroutes.

  • The main route can't have any subroutes of its own.

  • Give the partner routes the same days and hours as the main route. SMRT counts every partner route as a van on each day the main route runs, even on a day the partner route doesn't normally run.

Step 1: Set up each partner route

  1. Go to Settings → Delivery → Delivery Routes.

  2. Click the route you want to use as a partner route.

  3. Next to Master or subroute, make sure Master is selected.

  4. Under Real-Time Route Optimization, select Optimization Disabled.

  5. Click Save.

  6. Do the same for every other partner route.

Partner routes must have optimization turned off. A route with Optimization Enabled won't appear in the list in Step 2.

Step 2: Set up the main route

  1. Go back to Delivery Routes and click the route you want as the main route.

  2. Next to Master or subroute, make sure Master is selected.

  3. Under Real-Time Route Optimization, select Optimization Enabled.

  4. Find Optimize with other routes and select Enabled.

  5. Click the Select routes to optimize with box and pick your partner routes.

  6. Click Save.

Now open one of the partner routes. You'll see Route optimization is being handled by followed by the name of your main route. That means it worked.

Step 3: Put your customers on the main route

The simplest setup is to put all the customers in that area on the main route. You don't need to decide which van visits which customer. SMRT does that each day.

If some customers are already on a partner route, that's fine too. Their stops are still included and shared out with everyone else's.

What happens each day

  • SMRT plans the whole group automatically early each morning, as long as the main route is set to optimize automatically. See Route Optimization Settings Explained.

  • SMRT moves each stop onto the route of the van that will visit it. Each van's stops then appear under its own route on the Delivery screen and in the delivery app.

  • The van that visits a customer can change from one day to the next. That's normal: SMRT picks whatever works best that day.

  • Each route keeps its own start time, end time, start point and end point. Set these on each route separately.

  • The whole group can have up to 250 stops per day.

Optimizing the group yourself

  1. Open Delivery from the home screen.

  2. Pick the day, then select the main route. Partner routes don't have an Optimize button.

  3. Click Optimize, then choose one of these:

    • Run optimization for today plans the day using your normal settings.

    • Make adjustments for today lets you change the plan for this one day. See the next section.

Careful once vans are loaded. If the day has already been planned, SMRT warns you before it runs again. Running it again can move stops from one van to another. Don't do it after drivers have loaded their vans.

When a driver is off: Make adjustments for today

Use this when one day is different from normal, for example a driver calls in sick or a van is in the shop.

  1. On the Delivery screen, pick the day and select the main route.

  2. Click Optimize → Make adjustments for today.

  3. A window called Settings for (and the day) opens. It lists your partner routes.

  4. Remove the route that isn't running that day.

  5. Click Optimize now.

SMRT shares all of that day's stops between the main route and the partner routes still in the list. The stops from the route you removed aren't lost. They go to the other vans.

If only one van is going out, turn off the Optimize with other routes switch in the same window. Every stop goes on the main route.

This only changes that one day. Your route settings stay the same, and the next day goes back to normal on its own.

Common questions

I can't find "Optimize with other routes" on my route.
It only shows on a Master route that has Optimization Enabled and no subroutes. Check those three things.

A route is missing from "Select routes to optimize with".
The list only shows Master routes with Optimization Disabled that aren't already a partner of another main route. A route can only be in one group.

The settings on my partner route are grayed out.
That's expected. The main route controls them. Click the main route's name next to Route optimization is being handled by to open it.

Where is the Optimize button on my partner route?
There isn't one. Select the main route on the Delivery screen and optimize from there.

How do I stop planning the routes together?
Open the main route, set Optimize with other routes to Disabled and click Save. Each partner route then goes back to its own settings. If you want a partner route optimized on its own, select Optimization Enabled on that route.

Did this answer your question?